Windows force cd eject

Some PCs have eject keys on the keyboard, usually near volume controls. Look for key with an upward-pointing triangle with a horizontal line underneath. Safely removing the USB clears the cache and the remaining data; stopping any process going on in the background. Try shutting down or configuring any software programs that create discs or monitor the disc drive.

If the door still does not open, insert the end of a straightened paper clip into the manual eject hole on the front of the drive. Hardware troubleshooter reviews, diagnose and identifies operational or technical problems within a hardware device. Type troubleshooting in the search bar, click on troubleshooting. Click on Hardware and Devices. Follow the steps from the wizard to run the troubleshooter.

Refer the article below article to install the drivers. How to: Install and Update drivers in Windows Get back to us if you require further help on your query. Turning off your computer will stop the disk from spinning and make it safe to open the drive. Press the Power button on the front of the computer. It should release, moving to the "Off" setting. Remove the side panel from the computer. Check your PC's manual for specific instructions.

Generally speaking, if there are thumbscrews, you can unscrew them by hand. Other screws can be loosened with a screwdriver. Once unscrewed, press lightly on the panel and slide it rearward until you can remove it completely. You should see a power cable connecting it to the inside of the computer.

The connector is usually on the back of the drive and made of plastic with 4 attached wires. If the cable was not connected, connect it securely now.

This was likely the problem. Remove the power cable and try another. Exchange the original power cable with another that is not in use. If your CD drive will not open, it may be an issue with its power source. Try replacing the cable that plugs into the back of the drive.

If you cannot find another free power cable, try reattaching the original power cord into the drive after unplugging it. Replace the side panel of your computer and plug in its power cords. If the drive's power source prevented it from ejecting, it should now be resolved. Can you instruct me as to how I can place this shortcut on my quick launch or taskbar? Dragging doesn't work. Find the application in the Windows File Explorer.

Right click while the cursor is placed on the application and the pop up menu should have a Pin to Task Bar option. Not Helpful 14 Helpful 7. Not Helpful 60 Helpful Take a paperclip, straighten it, and insert into the hole and push. The tray should eject, showing what is possibly in the unit.

Not Helpful 25 Helpful 3. On the corner of the screen, there should be an icon with the CD being put into the computer. Hover over it or right-click it, and you will have the option to eject. Not Helpful 26 Helpful 1. Otherwise, there should be a button near the drive on the outside that will prompt it to open.

Not Helpful 30 Helpful 6. You will be prompted with a window telling you that the disk or volume is busy. You will have to c lose all the files on the device or stop the application accessing the drive and click the eject icon to safely remove or eject the device. Alternately, you can right-click the name of the device in File Explorer and eject from there as well. This post showed you steps to take to properly eject or remove external storage devices from Windows If you find any error above, please use the comment form below to report.

I agree!